Newsletter subscription
Subscribe to our bimonthly newsletter for latest news about TDKv and the crane hire business:
Crane hire directory
More than 6.000 crane hire companies worldwide with complete address information (incl. phone, fax, e-mail, website) available on CD-ROM. With the International Crane Rentals Directory you will immediately find the suitable crane hire company for your lifting job in more than 80 countries.
International Crane Rentals Directory »
Scaled top views
NEW! Scaled top views for 75 current telescopic cranes manufactured by Liebherr, Terex-Demag, Tadano Faun and Grove in scale 1:100, 1:200, 1:250 and 1:500 in one book for your job site planning.
Planningfoils-Book 3 »
CAD crane blocks
CAD blocks top views and side views for mobile cranes as DXF or DWG-file for your jobsite planning.
Read more »
Advertising
Listed at
Bauma
Liebherr mobile erects world's tallest wind power station
The first Liebherr LG 1750 lattice boom crane has erected what is claimed to be the tallest wind power plant in the world, the 5MW Repower company plant close to Brunsbuttel in the North of Germany. Each rotor blade is 61.5m long and weighs 18, and the hub height is 120m. When it begins operation, the plant will generate 17 million kilowatt-hours per annurn and ultimately supply 4,000 homes with current in the Elbe harbour.
The LG 1750, launched by Liebherr at the Bauma show in Munich in the spring, is an eight-axle mobile crane of 96t weight. It arrived at the job site in Brunsbuttel in a convoy of 48 low loaders. The heaviest component in the wind power plant weighed 170t, and this section had to be positioned at 26m radius and a height under hook of around 85m. The crane handled this load-case with the 105m long lattice boom and the 42m derrick boom. For the last three big lifts - top tower section, machinery deck, and blade star - the four-man Nolte team extended the boom to 122m and mounted to it an off-set 12m jib. Because of the high set-up of the basic equipment - the slewing ring is already situated at a height of nearly 5m Liebherr said that this way it was possible to attain a pulley head height of 135m.
The last part of the tower was erected in this configuration. Again at a radius of 26m, the crane positioned the steel cylinder of 40m and thus completed the tower of 115m. The crane also positioned the machinery deck, which weighed 142t, was 18m long, and 6m high. The machinery deck was completed with other components such as power train, generator and deck crane before the giant blade star with its 126m rotor diameter could be assembled on the ground. An anemometer on top of the crane continuously signalled to the 25-man site erection team gusts with wind speeds of up to 9m per second. This was too much to lift the propeller so it was suspended on the hook of the LG 1750 for several hours. Late in the evening, the wind conditions allowed the three-blade hub to be lifted to a height of 120m. Illuminated by spotlights, the blade star was bolted to the machinery deck, and the windmill completed.
Source: Cranes Today
Tags: Bauma - Lattice boom crane - LG 1750 - Liebherr - Nolte - Repower - Wind power plant
Liebherr renames telescopic family
Liebherr-Werk Ehingen has renamed its telescopic mobile cranes. The new names continue to indicate lifting capacity and generation, as before, but also now show the number of axles. Most cranes in the line-up today are given the generation or version name '.1'. Under the new system, the LTM 1045/1, for example, becomes the LTM 1045-3.1. The 1045 indicates the 45t lifting capacity (as before) the 'dash 3' indicates that it has three axles, and the 'point 1' indicates the version.
Only the LTM 1060/2 and LTM 1800 are excluded from the new type designation system. Their names remain unchanged. Liebherr introduced the new system in part at the Bauma fair in March when it unveiled the LTM 1090-4. In pre-production marketing, it had been promoted as the LTM 1080/2 a second generation 80-tonner. It was reclassified as 90t, and so the LTM 1090/3 became the LTM 1100-4. The five-axle 100-tonner remained the LTM 1100/2 until June, when the new system was introduced across the full range and it became the LTM 1100-5.1.
The new names for the Liebherr mobile cranes are:
- LTM 1030-2.1 (35 t ; two axles)
- LTM 1045-3.1 (45 t; three axles)
- LTM 1055-3.1 (55 t; three axles)
- LTC 1055-3.1 (55 t; three axles)
- LTM 1060/2 (60 t; four axles)
- LTM 1090-4.1 (90 t; four axles)
- LTM 1100-4.1 (100 t; four axles)
- LTM 1100-5.1 (100 t; five axles)
- LTM 1150-5.1 (150 t; five axles)
- LTM 1220-5.1 (220 t; five axles)
- LTM 1250-6.1 (250 t; six axles)
- LTM 1300-6.1 (300 t; six axles)
- LTM 1400-7.1 (400 t; seven axles)
- LTM 1500-8.1 (500 t; eight axles)
- LTM 1800 (800 t; eight axles)
Source: Connectingcranes.com
